PreTreater Pro
      Back to home
      1. KNOWLEDGE BASE
      2. PreTreater Pro

      Pretreater Pro: How to select a tank

      An easy step-by-step guide on how to switch between tanks on the Pretreater Pro machine.

      The Pretreater Pro machine is equipped with four tanks. Two are destined for pretreatment liquids (L1 and L2), one for the cleaner solution (CL) and the last one is the waste tank (MT).

      Tank-Storage-CompartmentThe two-tank option for pretreatment liquids offers you the possibility to fill each tank with a different kind of solution. For example, in the first slot you can install a tank that contains a pretreatment liquid like Texjet Inks - Pretreatment for Darks, which is intended for dark colored garment applications and the second tank can be filled with the Texjet Inks - Pretreatment for Lights solution, which is used in light colored fabrics.

      Tip: Another alternative, if you aim for a large production, is to install in both slots tanks that contain the same pretreatment solution. This way, you double the capacity of the selected liquid and you avoid the chance to run out of it quickly, while in the middle of your printing production.

      Switching between tanks, either because you want to select a different pretreatment liquid or you want to initiate the maintenance procedure by loading the cleaner solution. This, can be achieved with both ways:

      Via Menu button

      Step 1

      At the Home screen, in your top right, tap on the Menu button.

      Step 2

      Selecting-the-tanks-page-on-the-screen-1-copySelect the Tanks icon.

      Step 3

      Choose the tank of your choice.

      Step 4

      Confirm to start the process and Yes to proceed.

      Via Tanks icons

      Step 1

      At the Home screen, in your bottom right, long-press the Tanks Icons.

      Step 2

      Selecting-the-preferred-tankChoose the one you want to use.

      Step 3

      Confirm to start the process and Yes to procced.